PCM16 Silicon Piezoresistive Pressure Sensor
Product overview
The PCM16 silicon piezoresistive pressure sensor is the key component of pressure sensors and transmitters. This high-performance sensing element can be easily amplified and assembled into standard output transmitters.
Encapsulated with a diffused silicon die in 316L stainless steel housing, it transmits pressure via diaphragm and sealed silicon oil. The die is isolated from process media with an all-solid-state structure, suitable for harsh corrosive conditions. It adopts O-ring sealing for easy installation.
Customized services are available, including diaphragm sensing structure, wide temperature compensation, high reliability, shock and vibration resistant pressure sensors.
Features
■ Constant current excitation
■ Highly reliable imported pressure die
■ Wide temperature range compensation
■ Normalized output is optional
■ The compensated board with glue for moisture-proof protection
■ Standard Φ19mm, customization for other diameter
■ 316L material for all metal
■ High performance, high reliability
■ 18 months guarantee
Applications and industries
■ Process control systems
■ Pressure calibration instruments
■ Refrigeration equipment and HVAC control
■ Hydraulic systems and valves
■ Level measurement
■ Biomedical instruments
■ Ships and navigation
■ Aircraft and avionics systems
Product Parameters
Electrical performance parameters | |
| Pressure range | 0~40kPa…10MPa |
| Pressure reference | Gauge pressure, Absolute pressure, Sealed gauge pressure |
| Excitation | 1.5mA recommended for constant current |
| Input impedance | Constant current: 2kΩ~5kΩ |
| Electrical connection | Silicon soft wire |
| Compensated temp. range | 0ºC ~ 60ºC (≤70kPa); -10ºC ~ 70ºC (other ranges) |
| Operating temp. | -40ºC ~ 120ºC |
| Storage temp. | -40ºC ~ 120ºC |
| Insulation resistance | ≥200MΩ/250VDC |
| Response time | ≤1ms (up to 90%F.S.) |
| Measured medium | All the liquids and gases which are compatible with 316L. |
| Mechanical vibration | 20g (20~5000Hz) |
| Shock | 100g/10ms |
| Service life | 1×106 (cycles) |
Structural performance parameters | |
| Diaphragm material | 316L |
| Housing material | 316L |
| Oil filling | Silicon oil |
| Sealing ring material | NBR or FKM |
Basic parameters | ||||||
| Item | Condition | Min | Typical | Max | Unit | Note |
| Non-linearity | 0.2 | 0.3 | %F.S. | Note ⑴ | ||
| Hysteresis | 0.03 | 0.05 | %F.S. | |||
| Repeatability | 0.03 | 0.05 | %F.S. | |||
| Zero output | -2 | ±1 | 2 | mV | ||
| Full scale output, 1.5mA | 60 | 90 | 150 | mV | ||
| Zero temp. drift | 1 | 1.5 | %F.S. | |||
| Sensitivity temp. drift | 1 | 1.5 | %F.S. | |||
| Thermal hysteresis | 0.075 | 0.1 | %F.S. | |||
| Long-term stability | 0.2 | 0.3 | %F.S./Year | |||
Note:
⑴ Calculate according to the BFSL least square method; negative pressure range adopts sectional calculation.
⑵ Under 1.5mA excitation, the output varies with pressure range: low-range outputs are relatively low, while high-range outputs are relatively high. Customers requiring detailed output ranges shall inquire with our company before ordering.
⑶ Within the compensated temperature range 0ºC ~ 60ºC and -10ºC ~ 70ºC, the temperature is 30ºC for reference.
⑷ After measuring pressure under the high and low temperatures, return to the reference temperature.
Production process





Testing Equipment




Certificate

Company profile

Nanjing Wotian Technology Co., Ltd. was established in 2005. It is an outstanding top sensor manufacturing enterprise in Jiangning District. The company was rated as Nanjing Engineering Technology Research Center and Nanjing Municipal Engineering Research Center, Nanjing Enterprise Technology Center, Nanjing Postdoctoral Innovation Demonstration Base; is the unit that formulated the national standards for "Silicon Piezoresistive Pressure Sensitive Chips" and "Silicone Pressure Sensors". It is the leading domestic manufacturer of pressure sensors, with core technology of diffused silicon pressure sensor pressure transmitter, level sensor and temperature sensor and existing staff over 600. The annual production of pressure sensors is more than 4.5 million. The products have been exported to more than 80 countries and regions. Nanjing Wotian was awarded the honorary title of "Sensor Application Program Demonstration Enterprise" by the Ministry of Industry and Information Technology in 2019. "Creating value for customers" is the goal that enterprises always pursue. As leading manufacturer in the domestic pressure sensor industry, the company will revitalize China's pressure sensor business as its own responsibility, work diligently, step by step, strive to make pressure sensors better, and provide customers with cost-effective sensors. Nanjing Wotian Technology Co., Ltd. has passed ISO9001-2015 quality management system certification and TS16949 certification for the automotive industry.
Company advantage
Mass production
We have one production center in Nanjing and one production center in Anshan with 25,000㎡ plant and over 1000 units of production equipments. The main annual capacity of sensors is over 4,500,000 pieces.
Imported equipments
We have imported more than 20 sets of pressure controllers for our production line.
Informatization management
We have the information management system of CRM, PLM, ERP, MES and DINGDING etc.
Comprehensive testing
We have our own lab and testing equipment such as lightning stroke, surging, static electricity, vibration, high-low temperature impact test and helium mass-spectrum leak detection.



